Installing our Front Soundstage Kit in your Jeep Wrangler or Gladiator is easy and should take you less than 15 minutes. Before you begin, grab the included tools that were shipped with your kit and click on the installation guide below for your vehicle. Featuring step by step instructions with images as well as an easy-to-follow video guide.
INSTALLATION GUIDES
JEEP INSTALLATION GUIDES
Installing our Front Soundstage Kit in your Jeep Wrangler or Gladiator is easy, and should take you less than 15 minutes. Before you begin, grab the included tools that were shipped with your kit, and then click on the installation guide listed below for your vehicle. Our guides include step by step instructions with images, as well as an easy-to-follow video guide. Have no fear about installation. Within minutes you'll be jamming out to your new speakers!
WRANGLER | JK 2014 - 2018
TOYOTA INSTALLATION GUIDES
Installing our Front Soundstage Kit in your Toyota RAV4, Tacoma, or Tundra is easy, and should take you less than 15 minutes. Before you begin, grab the included tools that were shipped with your kit, and then click on the installation guide listed below for your vehicle. Our guides include step by step instructions with images, as well as an easy-to-follow video guide. Have no fear about installation. Within minutes you'll be jamming out to your new speakers!
JEEP WRANGLER / GLADIATOR FRONT SOUNDSTAGE INSTALLATION GUIDE - JL/JT
Installation of our Front SoundStage Speaker Upgrade Kits is easy. We've included the necessary 7mm bit that works with your Jeep tool kit or any small ratchet driver, and a panel tool. Expect to spend roughly 10 to 15 minutes on install. Watch the quick video, follow the step-by-step guide, or download the PDF - whatever is easiet for you.
TOOL KIT
3 TIPS TO KNOW BEFORE INSTALL
INSTALLATION VIDEO
STEP-BY-STEP GUIDE
STEP 1 - GRILLE REMOVAL
Using the enclosed panel puller tool, remove factory speaker grille. There will be four (4) clips holding it in place, two (2) on left side and two (2) on the right side.
STEP 2 - SPEAKER REMOVAL
Remove the two (2) screws holding the factory speaker in place using the enclosed 7mm bit. Then, lift the speaker up from the sub-dash assembly and unplug the speaker from the factory harness.
STEP 3 - CONNECTING
Plug the Terra Acoustics tweeter/grille combo into the Terra Acoustics midrange driver.
STEP 4 - CONNECT TO FACTORY
Plug the factory harness directly into the Terra Acoustics midrange driver. NOTE: In Standard factory audio Jeeps, DO NOT connect Jeep male plug to the midrange connector. Connect the factory male plug to WHITE plug on pigtail harness.
STEP 5 - INSTALL IN DASH
Lower the midrange into the dash while tucking the harness into the negative space below the midrange, leaving the junction plug of the tweeter and midrange below the midrange. Using the factory screws, attach the Terra Acoustics midrange driver back to the dash.
STEP 6 - GRILLE INSTALLATION
Taking careful note to insure tweeter wiring is contained within the perimeter of the reimagined grille, and NOT making contact with the area directly above the midrange, simply snap the grille back into place.
STEP 7 - ENJOY YOUR MUSIC
That's it! Now start hearing your favorite music again, for the very first time.
STEP 1
Using the enclosed panel puller tool, remove factory speaker grille. There will be four clips holding it in place, two (2) on the left and two (2) on the right side.
STEP 2
Remove the two screws holding the factory speaker in place using the enclosed driver. Then, lift the speaker up from the sub-dash assembly and unplug the speaker from the factory harness.
STEP 3
Plug the Terra Acoustics tweeter/grille combo into the Terra Acoustics midrange driver.
STEP 4
Plug the factory harness directly into the Terra Acoustics midrange driver.
STEP 5
Lower the midrange into the dash while tucking the harness into the negative space below the midrange, leaving the junction plug of the tweeter and midrange below the midrange. Using the factory screws, attach the Terra Acoustics midrange driver back to the dash.
STEP 6
Taking careful note to insure tweeter wiring is contained within the perimeter of the reimagined grille, and NOT making contact with the area directly above the midrange, simply snap the grille back into place.
JEEP WRANGLER FRONT SOUNDSTAGE INSTALLATION GUIDE - JK
Installation of our Front SoundStage Speaker Upgrade Kits is easy. Everything you need to install your kit is included in the box. Look for the tool kit underneath the foam protective insert. Expect to spend roughly 10 to 15 minutes on install. Watch the quick video, follow the step-by-step guide, or download the PDF - whatever is easiet for you.
TOOL KIT
INSTALLATION VIDEO
STEP-BY-STEP GUIDE
STEP 1 - GRILLE REMOVAL
Using the enclosed panel puller tool, remove the factory speaker grille. There will be two (2) clips holding it in place, one on each side.
STEP 2 - SPEAKER REMOVAL
Remove the two (2) screws holding the factory speaker in place using the enclosed 7mm bit. Then, lift the speaker up from the sub-dash assembly and unplug the speaker from the factory harness.
STEP 3 - IDENTIFY DRIVER AND PASSENGER GRILLES
While our Terra Acoustics JK grilles look very similar, there is a distinct Driver and Passenger side. On the underside of the grilles, look for a small marking near the clip. LH = Driver side and RH = Passenger side.
STEP 4 - CONNECTING
Now that you have the correct grilles identified, plug the Terra Acoustics tweeter/grille combo into the Terra Acoustics midrange driver.
STEP 5- CONNECT TO FACTORY
Plug the factory harness directly into the Terra Acoustics midrange driver. NOTE: In Standard factory system Jeeps, DO NOT connect the Jeep male plug to midrange connector. Connect the factory male plug to WHITE plug on the pigtail harness.
STEP 6 - INSTALL IN DASH
Tuck the harness into the negative space below where the midrange sits, making sure the junction plug of the tweeter and midrange will be below the midrange.
STEP 7 - GRILLE INSTALLATION
Using the factory screws, attach the Terra Acoustics midrnage driver back to the dash. Taking careful note to insure the tweeter wiring is contained within the perimeter of the reimgained grille, and NOT making contact with the area directly above the midrange, simply snap grille into place.
STEP 8 - ENJOY YOUR MUSIC
That's it. Now start hearing your favorite music again, for the very first time.
20MM TWEETER COLORED ACCENT RINGS INSTALLATION GUIDE
Installation of our 20MM Tweeter Colored Accent Rings is easy. We've included the necessary adhesive and applicator tool. Expect to spend roughly 3 to 5 minutes per side on installation.
Before doing anything: test fit the accent rings on your tweeters to make sure you love the color and look before using the adhesive. While they can be removed, it's not an easy process and you seriously risk damaging the tweeter.
Watch the short video below on how to install your rings and make sure you allow the alloted cure time (one hour) prior to any clean up.
Hear the rich, vibrant details your Jeep has been missing.
Just learning about how to install our speakers? Let's get back to the action and find the right speaker upgrade for your Jeep.